Description
The VEGA VEGAPOINT 23 Compact Capacitive Limit Switch is designed for overfill and dry run protection.
An alternating electric field is generated at the tip of the measuring electrode. If the sensor is covered with medium, the capacitance of the sensor changes. This change is detected by the electronics and converted into a switching command.
Any buildup is ignored to a certain degree and therefore has no influence on the measurement.
The wetted parts of the instrument are made of PEEK and stainless steel 316L. The process seal is made of FKM. The housing is made of stainless steel 316L or Valox and is available in protection classes IP66/IP67 and up to IP69.
Features
Available up to 39.4in (1m) in length
Process fitting:
Thread G1/2 to G1, M24 x 1.5
Thread 1/2 to 1 NPT
Clamp 1 to 2in
Further hygienic fittings
Process pressure (standard):
-1 to 25bar
-100 to 2,500kPa
-14.5 to 363psig
Process pressure (full metal/stainless steel):
-1 to 64bar
-100 to 6,400kPa
-14.5 to 928psig
-40 to 239°F process temperature
-40 to 158°F ambient temperature
12 to 35VDC operating voltage
Transistor output signal (PNP/NPN)
Reviews
There are no reviews yet.